Lower Total-Cost-of-Ownership in Poor Process Environments with Pneumatic Vane Actuators

Design advantages for use in poor process conditions (click for larger view).

Clean, dry instrument air is critical for pneumatic instruments and actuators to work properly. In remote, dirty process control environments, like refineries, chemical plants, power plants, water treatment facilities, pulp & paper mills, or mining facilities, providing clean instrument air is challenging,  costly and problematic.  Along with poor instrument air, the ambient air in these areas is generally filled with dust and contaminants. Process equipment must be engineered to withstand these conditions, and devices with low tolerance to dust, dirt, condensate, and poor ambient air quality (such as rack and pinion actuators) are to be avoided. Devices in these areas are costly to maintain as shut-downs and repairs are very expensive.

For the operation of pneumatically controlled valves, and as a better alternative to rack and pinion actuators, Kinetrol rotary vane actuators are an excellent choice. Their simple design, with one moving part, and an elegantly engineered vane, inherently protects the actuator from bad instrument air. Kinetrol's use of double opposed polyurethane lip seals, backed by stainless steel expanders, ensure long-term lip seal contact and effective sealing for years of maintenance free life. The vane, lip seals, and expanders actually provide a self-cleaning, or wiping, mechanism for any moisture, dirt or dust entering the interior of the actuator. In effect, the vane actuator's design "sweeps away" the debris that will cause other actuators to fail.

A considerable cost savings can be calculated given the trouble-free performance Kinetrol vane actuators provide. Assuming both a Kinetrol and standard rack and pinion actuator cost approximately the same, and that the life of a typical rack and pinion actuator in these environments is approximately 1 year, you can easily see the savings. By factoring in the replacement cost for an new actuator, and the cost of labor to install, you’ll find a standard rack and pinion is at least 2.5x the cost of Kinetrol over a 2 year period.

Kinetrol actuators have a well-earned reputation for operating trouble-free for years in the most difficult environments. Considering their years of maintenance-free service, it’s easy to understand the significantly lower total-cost-of-ownership they deliver.

For more information, visit Kinetrol USA at http://www.kinetrolusa.com or call 972-447-9443.

Rugged Design Makes This Vane Actuator the Best Choice for Any Valve or Damper Automation Job

Watch the video below for a quick understanding of why Kinetrol Vane Actuators provide the longest service life in the toughest valve and damper applications.

EHD 1/4 Turn Electric Actuators

Kinetrol HD 1/4 Turn Electric Actuator from Kinetrol USA

Proportional Spool Valve + Robust Force Balance Mechanism = Smooth and Accurate Control

Kinetrol's AP pneumatic positioner.

Kinetrol's AP pneumatic positioner combines the smoothness and accuracy of Kinetrol’s proven mechanical positioner technology (using a proportional spool valve driven by a simple, accurate and robust force balance mechanism) with new advances in convenience and simplicity of use, derived from the unique innovative design both of the internal mechanism and of the overall package.

The result is a positioner with unparalleled performance and real industrial robustness, easy to calibrate and characterize, and adaptable to the whole range of applications with a great list of options:

• High flow valves
• Direct mount or industry standard discrete mount housings
• 4-20mA angle retransmit
• Limit switches
• Clear Cone position monitor
• I/P convertors (either simple or with various explosion proof options)

OPERATING PRINCIPLES

The AP positioner is designed to drive a rotary or linear actuator to a position set by a 3-15 psi (0.2-1.0 bar) signal and hold it there until the signal changes.

When a signal pressure is applied to the diaphragm it moves the force balance lever clockwise against the tension of the feedback spring. This moves the spool valve, supplying air pressure to one side of the actuator while exhausting trapped air from the other side. The feedback shaft follows the movement of the actuator and turns the cam counter clockwise, pushing the cam follower and increasing the tension on the feedback spring until it balances the force on the diaphragm and moves the spool valve to its central ‘hold’ position.

The relationship between the input signal and desired position (the ‘characteristic’) is determined by the cam profile. A linear 3-15 psi (0.2 - 1.0 bar) signal / 0-90° output movement cam is standard. Split range, fast opening, equal percentage or customized characteristic cams are available.

See the brochure below for detailed information and illustrations. For more information, contact Kinetrol USA at http://www.kinetrolusa.com or call 972-447-9443.

Kinetrol AP Pneumatic Positioner from Kinetrol USA

Kinetrol Blueline Series Food, Beverage, and Pharma Pneumatic Actuators

Here's a new, short video about the Kinetrol Blueline Series actuator. The Blueline Series of pneumatic vane actuators for use in foodservice and beverage processing. The actuators are intended to be installed in areas where harsh chemical wash-down is required.

Kinetrol Blueline Features:

• Very good resistance to "caustic wash-down" procedures as typically performed in the food industry.
• Very good resistance to corrosion In salt laden environments.
• Meets the FDA’s resinous and polymeric standard. 

Accuracy, Smooth Operation, and Efficiency Key to Industrial Valve Postioner

EL electro-pneumatic positioner

The EL electro-pneumatic positioner combines the precision and adaptability of a digital electronic control circuit with the smoothness and efficiency of Kinetrol's proven proportional servo valve, to give the best available 4-20mA positioning performance from rotary pneumatic actuators. This unbeatable performance is combined with the easiest available setup procedure, easiest access to all functions and options, easy connectibility, and a truly compact all-metal enclosure, plus unique easy-set isolated angle retransmit and limit switch options inside the same enclosure.

The EL positioner is designed to drive a rotary or linear actuator to a position set by the 4-20 mA input signal, and then hold it there until the signal changes.

The microprocessor in the loop powered 4-20 mA positioner circuit reads signal via one channel of a 12-bit A-D convertor, reads the position voltage from tie pot via the second channel of the A-D convertor, and compares the two. If it detects a position different from that required by the signal, it changes its output to the servo valve in order to drive the actuator in the direction required to reach the correct position. As the actuator moves, the feedback pot voltage changes, and the microprocessor continually calculates how to adjust the servo valve in order to guide the actuator accurately into position. Because the servo valve is a fully proportional device, it can be adjusted precisely and smoothly to slow the actuator to a stop exactly where it should be.  The microprocessor is programmed with a sophisticated but compact algorithm which allows this critical dynamic valve adjustment to be made correctly to give optimal results with any actuator/load combination - slow or fast, low friction or high friction, low inertia or high inertia, all can be optimized by PGAIN and DAMP parameters via the positioner circuit pushbuttons. The 12-bit A-D conversion gives resolution of about 1/40 degree.

EL positioner curve

The relationship between the input signal and desired position (the "characteristic") is stored in the microprocessor's memory. It can be set to follow any one of eleven pre-programmed curves between its two endpoints. The endpoints (each a combination of a signal value and a position) are set by the user via the pushbuttons. One of the eleven curves is a linearly proportional characteristic - this characteristic only can be selected to give movement of the actuator for signals extrapolated below the low endpoint and above the high endpoint, or to stop dead on signals below the low and above tie high endpoint. The "stop dead" behavior is the only option for the other ten non-linear curves.

The settings entered by the user are stored in non - volatile memory, and are retained even if power (i.e. signal) is lost.

Save The Date! Kinetrol Exhibiting at Valve World Expo 2017

Kinetrol will be exhibiting at Valve World Expo 2017.

Come visit us at BOOTH #335

The Valve World Americas event will cover a variety of valve and valve-related topics that are essential to today’s valve market.

Date:

June 20 and 21st, 2017

Location:
George R. Brown Convention Center
1001 Avenida De Las Americas
Houston, TX 77010
USA

Exhibition Hours
Tuesday, June 20 from 09:00AM until 5:00PM
Wednesday, June 21 from 09:00AM until 5:00PM